Dyno Rental
North Brevard, FL
Our Mainline 3000hp ProHub Dyno is perfect for a full spectrum of optimizing engine calibration, from drivability and full VE mapping to WOT pulls.
Use the Contact Form to schedule an appointment
Pricing
Pricing is subject to change without notice
Dyno Rental by the Hour
$200/Hour, 2 hour minimum
30 minutes set up and 30 minutes take down not charged
Bring your own tuner
Guest WiFi available for remote tuner access
Multi-day pricing available for more in-depth testing
Additional Fees
Spill Fluids that Require Clean Up $125
Start a Fire $150
Did Both? $250
Vehicle unable to run after being bolted to dyno $100
Shop Labor Rate $200/Hour
Cleaning and flow matching injectors $25/ea
Repeatability
The Portable ProHub 2WD Dynamometer connects directly to the vehicle’s axle hubs, via billet steel adapters, effectively removing wheel and tire related variables from the testing and tuning equation, for the ultimate in test data repeatability from run to run.
Safety
The car is bolted directly to the dyno, with no straps to come loose or break, and no traction issues to worry about.
Steady State Control
The dyno can hold any RPM regardless of throttle input and power, enabling simulation of any driving condition and the ability to tune all areas of the VE or Load Table quickly and accurately
What to Bring
Things to remember, plan for, or bring
Consumables: Fuel, Spark Plugs, Etc
321Dyno does not sell fuel, you must bring your own and bring plenty to accomplish your goals for the session.
If you run out of fuel, you forfeit your remaining session and will not receive a refund for any time you can’t use.
321Dyno does not currently stock any other consumables so please bring whatever you expect to use.
Time changing plugs, wires, filters or any other work done to the car is counted against rental hours.
Socket for any locking or splined lug nuts
If you have locking lug nuts or any other unusual requirements for removing your drive wheels, make sure you bring it.
Laptop/Cables/Dongles
If you will be tuning your own car, you must bring your own computer and all cables. None are available at 321Dyno to borrow or rent.
A Running, Mechanically Sound, Car
Please ensure your car is mechanically sound and will at least start and move under its own power (unless prearranged).
All time spent bolted to the dyno is charged, even if the car is not running.
If the car must be removed from the dyno, the entire session is forfeit.